This PR introduces the and flattening pre processing pass from Bitwuzla
to `bv_decide`. It splits hypotheses of the form `(a && b) = true` into
`a = true` and `b = true` which has synergy potential with the already
existing embedded constraint substitution pass.
Beyond this I also added some profiling infra structure for the passes.
This PR adds a normalization rule to `bv_normalize` (which is used by
`bv_decide`) that converts `x / 2^k` into `x >>> k` under suitable
conditions. This allows us to simplify the expensive division circuits
that are used for bitblasting into much cheaper shifting circuits.
Concretely, it allows for the following canonicalization:
```lean
example {x : BitVec 16} : x / (BitVec.twoPow 16 2) = x >>> 2 := by bv_normalize
example {x : BitVec 16} : x / (BitVec.ofNat 16 8) = x >>> 3 := by bv_normalize
```
This PR changes the signature of `Array.set` to take a `Nat`, and a
tactic-provided bound, rather than a `Fin`.
Corresponding changes (but without the auto-param) for `Array.get` will
arrive shortly, after which I'll go more pervasively through the Array
API.
This PR adds a feature to the the mutual def elaborator where the
`instance` command yields theorems instead of definitions when the class
is a `Prop`.
Closes#5672
This PR adds configuration options for
`decide`/`decide!`/`native_decide` and refactors the tactics to be
frontends to the same backend. Adds a `+revert` option that cleans up
the local context and reverts all local variables the goal depends on,
along with indirect propositional hypotheses. Makes `native_decide` fail
at elaboration time on failure without sacrificing performance (the
decision procedure is still evaluated just once). Now `native_decide`
supports universe polymorphism.
Closes#2072
This PR changes `bv_decide`'s configuration from lots of `set_option` to
an elaborated config like `simp` or `omega`. The notable exception is
`sat.solver` which is still a `set_option` such that users can configure
a custom SAT solver globally for an entire project or file. Additionally
it introduces the ability to set `maxSteps` for the simp preprocessing
run through the new config.
The latter feature was requested by people using `bv_decide` on SMTLIB
which has ginormous terms that exceed the default.
New behavior: when in recovery mode, if any tactic fails in `all_goals`
then the metacontext is restored and all goals are admitted.
Without this, it can leave partially-solved metavariables and incomplete
goal lists.
This introduces a notion of synthetic atoms into `bv_decide`'s
reflection framework. An atom can be declared synthetic if its behavior
is fully specified by additional lemmas that are added in the process of
creating it. This is for example useful in the code that handles `if` as
the entire `if` block is abstracted as an atom and then two lemmas to
describe either branch are added. Previously this had the effect of
creating error messages about potentially unsound counterexamples, now
the synthetic atoms get filtered from the counter example generation.
In patterns, ellipsis should always fill in each remaining argument as
an implicit argument, even if it is an optparam or autoparam. This
prevents examples such as the one in #4555 from failing:
```lean
match e with
| .internal .. => sorry
| .error .. => sorry
```
The `internal` constructor has an optparam (`| internal (id :
InternalExceptionId) (extra : KVMap := {})`).
We may consider having ellipsis suppress optparams and autoparams in
general. We avoid doing so for now since it's possible to opt-out of
them individually (for example with `.internal (extra := _) ..`) but
it's not possible to opt-in, and it is plausible that `..` with
optparams is useful in contexts such as the `refine` tactic. With
patterns however, it is hard to imagine a use case that offsets the
inconvenience of optparams being eagerly supplied.
Closes#4555
Following up #5928, updates the syntax for `omega` and `solve_by_elim`
and restores the syntax quotations in their implementations.
Following up #5898, uses the new tactic syntax in the library, replacing
all uses of `(config := ...)`.
Example: Normally subtype notation pretty prints as `{ x // x > 0 }`,
but now the difference in domains is exposed:
```lean
example (h : {x : Int // x > 0}) : {x : Nat // x > 0} := h
/-
error: type mismatch
h
has type
{ x : Int // x > 0 } : Type
but is expected to have type
{ x : Nat // x > 0 } : Type
-/
```
Example:
```lean
example : 0 = (0 : Nat) := by
exact Eq.refl (0 : Int)
/-
error: type mismatch
Eq.refl 0
has type
(0 : Int) = 0 : Prop
but is expected to have type
(0 : Nat) = 0 : Prop
-/
```
Specializes the congr lemma generated for the `arg` conv tactic to only
rewrite the chosen argument. This makes it much more likely that the
chosen argument is able to be accessed.
Lets `arg` access the domain and codomain of pi types via `arg 1` and
`arg 2` in more situations. Upstreams `pi_congr` for this from mathlib.
Adds a negative indexing option, where `arg -2` accesses the
second-to-last argument for example, making the behavior of `lhs`
available to `arg`. This works for `enter` as well.
Other improvement: when there is an error in the `enter [...]` tactic,
individual locations get underlined with the error. The tactic info now
also is like `rw`, so you can see the intermediate conv states.
Closes#5871
These implementations could be made more efficient by promoting them to
primitive operations, but I propose installing these in the meantime to
encourage users to avoid non-linearity problems.
* Now `getPathToBaseStructure?` can navigate to all parent structures,
not just through subobjects.
* Adds a "resolution order" for methods. This is the order that
generalized field notation visits parent structures when trying to
resolve names. The algorithm to compute a resolution order is the
commonly used C3 (used for instance by Python). By default we use a
relaxed version of the algorithm that tolerates inconsistencies. Using
`set_option structure.strictResolutionOrder true` makes inconsistent
parent orderings into warnings.
* This makes generalized field notation be able to resolve names for all
parent structures, not just those that are embedded as subobjects.
Closes#3467. (And addresses side note in #1881.)
* Modifies `getAllParentStructures` to return *all* parents. This
improves dot completion in the editor.
I'd previously added an instance from `ForIn'` to `ForIn`, but this then
caused some non-defeq duplication. It seems fine to just remove the
concrete `ForIn` instances in cases where the `ForIn'` instance exists
too. We can even remove a number of type-specific lemmas in favour of
the general ones.
Now that the elaborator supports primitive projections for recursive
inductive types (#5822), enable defining recursive inductive types with
the `structure` command, which was set up in #5842.
Example:
```lean
structure Tree where
n : Nat
children : Fin n → Tree
def Tree.size : Tree → Nat
| {n, children} => Id.run do
let mut s := 0
for h : i in [0 : n] do
s := s + (children ⟨i, h.2⟩).size
pure s
```
Note for kernel re-implementors: recursive structures are exercising the
kernel feature where primitive projections are valid for one-constructor
inductive types in general, so long as the structure isn't a `Prop` and
doesn't have any non-`Prop` fields, not just ones that are non-indexed
and non-recursive.
Closes#2512
The kernel supports primitive projections for all inductive types with
one construtor. The elaborator was assuming primitive projections only
work for "structure-likes", non-recursive inductive types with no
indices.
Enables numeric projection notation for general one-constructor
inductives.
Extracted from #5783.
This PR adds a new syntax for tactic and command configurations. It also
updates the elaborator construction command to be able to process this
new syntax.
We do not update core tactics yet. Once tactics switch over to it,
rather than (for example) writing `simp (config := { contextual := true,
maxSteps := 22})`, one can write `simp +contextual (maxSteps := 22)`.
The new syntax is reverse compatible in the sense that `(config := ...)`
still sets the entire configuration.
Note to metaprogrammers: Use `optConfig` instead of `(config)?`. The
elaborator generated by `declare_config_elab` accepts both old and new
configurations. The elaborator has also been written to be tolerant to
null nodes, so adapting to `optConfig` should be as easy as changing
just the syntax for your tactics and deleting `mkOptionalNode`.
Breaking change: The new system is mostly reverse compatible, however
the type of the generated elaborator now lands in `TacticM` to make use
of the current recovery state. Commands that wish to elaborate
configurations should now use `declare_command_config_elab` instead of
`declare_config_elab` to get an elaborator landing in `CommandElabM`.
This command comes from Lean 3, which I had previously ported and
contributed to Batteries (née Std). In this new version, `#where`
produces actual command Syntax for all features of a top-level scope
(rather than splicing together strings), and it also now reports
included variables.
---------
Co-authored-by: Kim Morrison <kim@tqft.net>
An important part of the interface of a function is the parameter names,
for making used of named arguments. This PR makes the parameter names
print in a reliable way. The parameters of the type now appear as
hygienic names if they cannot be used as named arguments.
Modifies the heuristic for how parameters are chosen to appear before or
after the colon. The rule is now that parameters start appearing after
the colon at the first non-dependent non-instance-implicit parameter
that has a name unusable as a named argument. This is a refinement of
#2846.
Fixes the issue where consecutive hygienic names pretty print without a
space separating them, so we now have `(x✝ y✝ : Nat)` rather than `(x✝y✝
: Nat)`.
Breaking change: `Lean.PrettyPrinter.Formatter.pushToken` now takes an
additional boolean `ident` argument, which should be `true` for
identifiers. Used to insert discretionary space between consecutive
identifiers.
Closes#5810
This adds the ability to add the converse direction of a rewrite rule
not just in simp arguments `simp [← thm]`, but also as a global
attribute
```lean
attribute [simp ←] thm
```
This fixes#5828.
This can be undone with `attribute [-simp]`, although note that
`[-simp]` wins and cannot be undone at the moment (#5868).
Like `simp [← thm]` (see #4290), this will do an implicit `attribute
[-simp] thm` if the other direction is already defined.
Type mismatch errors have a nice feature where expressions are annotated
with `pp.explicit` to expose differences via `isDefEq` checking.
However, this procedure has side effects since `isDefEq` may assign
metavariables. This PR wraps the procedure with `withoutModifyingState`
to prevent assignments from escaping.
Assignments can lead to confusing behavior. For example, in the
following a higher-order unification fails, but the difference-finding
procedure unifies metavariables in a naive way, producing a baffling
error message:
```lean
theorem test {f g : Nat → Nat} (n : Nat) (hfg : ∀a, f (g a) = a) :
f (g n) = n := hfg n
example {g2 : ℕ → ℕ} (n2 : ℕ) : (λx => x * 2) (g2 n2) = n2 := by
with_reducible refine test n2 ?_
/-
type mismatch
test n2 ?m.648
has type
(fun x ↦ x * 2) (g2 n2) = n2 : Prop
but is expected to have type
(fun x ↦ x * 2) (g2 n2) = n2 : Prop
-/
```
With the change, it now says `has type ?m.153 (?m.154 n2) = n2`.
Note: this uses `withoutModifyingState` instead of `withNewMCtxDepth`
because we want to know something about where `isDefEq` failed — we are
trying to simulate a very basic version of `isDefEq` for function
applications, and we want the state at the point of failure to know
which argument is "at fault".
Modifies `simp` to elaborate all simp arguments without disabling error
recovery. Like in #4177, simp arguments with elaboration errors are not
added to the simp set. Error recovery is still disabled when `simp` is
used in combinators such as `first`.
This enables better term info and features like tab completion when
there are elaboration errors.
Also included is a fix to the `all_goals` and `<;>` tactic combinators.
Recall that `try`/`catch` for the Tactic monad restores the state on
failure. This meant that all messages were being cleared on tactic
failure. The fix is to use `Tactic.tryCatch` instead, which doesn't
restore state.
Part of addressing #3831Closes#4888
The assumptions behind disabling error recovery for the `apply` tactic
no longer seem to hold, since tactic combinators like `first` themselves
disable error recovery when it makes sense.
This addresses part of #3831
Breaking change: `elabTermForApply` no longer uses `withoutRecover`.
Tactics using `elabTermForApply` should evaluate whether it makes sense
to wrap it with `withoutRecover`, which is generally speaking when it's
used to elaborate identifiers.
Makes the error messages report on RHSs and LHSs that do not match the
expected values when the relations are defeq. If the relations are not
defeq, the error message now no longer mentions the value of the whole
`calc` expression.
Adds a field to `mkCoe` with an optional callback to use to generate
error messages.
Note: it is tempting to try to make use of expected types when
elaborating the `calc` expression, but this runs into issue #2073.
Closes#4318
Adds ability to chain congruence lemmas when a function's arity is less
than the number of supplied arguments. This improves `congr` as well as
all conv tactics implemented using `congr`, like `arg` and `enter`.
(The non-conv `congr` tactic still needs to be fixed.)
Toward #2942.
Followup to #5841. Makes the `structure` command populate the new
`parentInfo` field with all the structures in the `extends` clause.
This will require a stage0 update to fully take effect.
Breaking change: now it's a warning if a structure extends a parent
multiple times.
Breaking change: now `getParentStructures` is `getStructureSubobjects`.
Adds `getStructureParentInfo` for getting all the immediate parents.
Note that the set of subobjects is neither a subset nor a superset of
the immediate parents.
Closes#1881
This default instance makes it possible to write things like `m!"the
constant is {.ofConstName n}"`.
Breaking change: This weakly causes terms to have a type of
`MessageData` if their type is otherwise unknown. For example:
* `m!"... {x} ..."` can cause `x` to have type `MessageData`, causing
the `let` definition of `x` to fail to elaborate. Fix: give `x` an
explicit type.
* Arithmetic expressions in `m!` strings may need a type ascription. For
example, if the type of `i` is unknown at the time the arithmetic
expression is elaborated, then `m!"... {i + 1} ..."` can fail saying
that it cannot find an `HAdd Nat Nat MessageData` instance. Two fixes:
either ensure that the type of `i` is known, or add a type ascription to
guide the `MessageData` coercion, like `m!"... {(i + 1 : Nat)} ..."`.
Using the same strategy as #5852 this provides `bv_decide` support for
`Bool` and `BitVec` ifs
this in turn instantly enables support for:
- `sdiv`
- `smod`
- `abs`
and thus closes our last discrepancies to QF_BV!
