This PR re-enables semantic tokens for Verso docstrings, after a prior
change accidentally disabled them. It also adds a test to prevent this
from happening again.
In the process, it became clear that there was a bug. The highlighting
strategy led to overlapping but not identical tokens, but the code had
previously assumed that this couldn't happen at the delta-encoding step.
So this PR additionally replaces the removal of duplicate tokens with
priority-based handling of overlapping tokens.
---------
Co-authored-by: Marc Huisinga <mhuisi@protonmail.com>
This PR adds a new helper parser for implementing parsers that contain
hexadecimal numbers. We are going to use it to implement anchors in the
`grind` interactive mode.
This PR fixes several causes of test flakiness and re-enables the tests
that were disabled in #10665, #10669 and #10673.
Specifically, it fixes:
- A race condition in the file worker that caused it to report an
incomplete snapshot prefix in the inlay hint request (confirmed to be
the cause of #10665)
- A bug in the test runner where it didn't correctly account for
non-deterministic message ordering inducing different RPC pointer
numbering (confirmed to be the cause of #10673)
- A race condition in the watchdog that would sometimes cause the module
hierarchy to be empty (likely the cause of #10669, but not confirmed as
this issue only reproduced again once in tens of thousands of test runs
on various machines, including CI)
- An unrelated bug in the module hierarchy implementation that would
cause it to report an empty module hierarchy when the file was changed
It also replaces some calls to `Task.get` in the language server with
`IO.wait` to protect the code against unfortunate compiler re-ordering.
This PR adds auto-completion for identifiers after `end`. It also fixes
a bug where completion in the whitespace after `set_option` would not
yield the full option list.
Closes#3885.
### Breaking changes
The `«end»` syntax is adjusted to take an `identWithPartialTrailingDot`
instead of an `ident`.
This PR significantly improves the test coverage of the language server,
providing at least a single basic test for every request that is used by
the client. It also implements infrastructure for testing all of these
requests, e.g. the ability to run interactive tests in a project context
and refactors the interactive test runner to be more maintainable.
Finally, it also fixes a small bug with the recently implemented unknown
identifier code actions for auto-implicits (#10442) that was discovered
in testing, where the "import all unambiguous unknown identifiers" code
action didn't work correctly on auto-implicit identifiers.
This PR redefines `String` to be the type of byte arrays `b` for which
`b.IsValidUtf8`.
This moves the data model of strings much closer to the actual data
representation at runtime.
In the near future, we will
- provide variants of `String.Pos` and `Substring` that only allow for
valid positions
- redefine all `String` functions to be much closer to their C++
implementations
In the near-to-medium future we will then provide comprehensive
verification of `String` based on these refactors.
This PR upstreams the Verso parser and adds preliminary support for
Verso in docstrings. This will allow the compiler to check examples and
cross-references in documentation.
After a `stage0` update, a follow-up PR will add the appropriate
attributes that allow the feature to be used. The parser tests from
Verso also remain to be upstreamed, and user-facing documentation will
be added once the feature has been used on more internals.
- [x] Updated docstrings for `simp!`, `simp_all!`, `dsimp!` to use
user-friendly language
- [x] Updated docstrings for `autoUnfold` fields to use user-friendly
language
- [x] Fixed broken test by updating expected output for simp! hover
documentation
- [x] Replaced technical terms with clear language: "will unfold
applications of functions defined by pattern matching, when one of the
patterns applies"
<!-- START COPILOT CODING AGENT TIPS -->
---
💡 You can make Copilot smarter by setting up custom instructions,
customizing its development environment and configuring Model Context
Protocol (MCP) servers. Learn more [Copilot coding agent
tips](https://gh.io/copilot-coding-agent-tips) in the docs.
---------
Co-authored-by: copilot-swe-agent[bot] <198982749+Copilot@users.noreply.github.com>
Co-authored-by: nomeata <148037+nomeata@users.noreply.github.com>
This PR speeds up auto-completion by a factor of ~3.5x through various
performance improvements in the language server. On one machine, with
`import Mathlib`, completing `i` used to take 3200ms and now instead
yields a result in 920ms.
Specifically, the following improvements are made:
- The watchdog process no longer de-serializes and re-serializes most
messages from the file worker before passing them on to the user - a
fast partial de-serialization procedure is now used to determine whether
the message needs to be de-serialized in full or not.
- `escapePart` is optimized to perform better on ASCII strings that do
not need escaping.
- `Json.compress` is optimized to allocate fewer objects.
- A faster JSON compression specifically for completion responses is
implemented that skips allocating `Json` altogether.
- The JSON compression has been moved to the task where we convert a
request response to `Json` so that converting to a string won't block
the output task of the FileWorker and so the `Json` value is not marked
as multi-threaded when we compress is, which drastically increases the
cost of reference-counting.
- The JSON representation of the `data?` field of each completion item
is optimized.
- Both the completion kind and the set of completion tags for each
imported completion item is now cached.
- The filtering of duplicate completion items is optimized.
Other adjustments:
- `LT UInt8` and `LE UInt8` are moved to Prelude so that they can be
used in `Init.Meta` for the name part escaping fast path.
- `Array.usize` is exposed since it was marked as `@[simp]`.
This PR prevents `rcases` and `obtain` from creating absurdly long case
tag names when taking single constructor types (like `Exists`) apart.
Fixes#6550
The change does not affect `cases` and `induction`, it seems (where the
user might be surprised to not address the single goal with a name),
because I make the change in Lean/`Meta/Tactic/Induction.lean`, not
`Lean/Elab/Tactic/Induction.lean`. Yes, that's confusing.
This PR normalizes the published diagnostics in the test runner so that
messages published out of order (due to parallelism) cannot cause test
failures. Clients can handle out-of-order messages just fine.
This PR generates `.ctorIdx` functions for all inductive types, not just
enumeration types. This can be a building block for other constructions
(`BEq`, `noConfusion`) that are size-efficient even for large
inductives.
It also renames it from `.toCtorIdx` to `.ctorIdx`, which is the more
idiomatic naming.
The old name exists as an alias, with a deprecation attribute to be
added after the next
stage0 update.
These functions can arguably compiled down to a rather efficient tag
lookup, rather than a `case` statement. This is future work (but
hopefully near future).
For a fair number of basic types the compiler is not able to compile a
function using `casesOn` until further definitions have been defined.
This therefore (ab)uses the `genInjectivity` flag and
`gen_injective_theorems%` command to also control the generation of this
construct.
For (slightly) more efficient kernel reduction one could use `.rec`
rather than `.casesOn`. I did not do that yet, also because it
complicates compilation.
This PR fixes a bug in `#eval` where clicking on the evaluated
expression could show errors in the Infoview. This was caused by `#eval`
not saving the temporary environment that is used when elaborating the
expression.
This PR modifies `intro` to create tactic info localized to each
hypothesis, making it possible to see how `intro` works
variable-by-variable. Additionally:
- The tactic supports `intro rfl` to introduce an equality and
immediately substitute it, like `rintro rfl` (recall: the `rfl` pattern
is like doing `intro h; subst h`). The `rintro` tactic can also now
support `HEq` in `rfl` patterns if `eq_of_heq` applies.
- In `intro (h : t)`, elaboration of `t` is interleaved with unification
with the type of `h`, which prevents default instances from causing
unification to fail.
- Tactics that change types of hypotheses (including `intro (h : t)`,
`delta`, `dsimp`) now update the local instance cache.
In `intro x y z`, tactic info ranges are `intro x`, `y`, and `z`. The
reason for including `intro` with `x` is to make sure the info range is
"monotonic" while adding the first argument to `intro`.
This PR modifies the pretty printing of anonymous metavariables to use
the index rather than the internal name. This leads to smaller numerical
suffixes in `?m.123` since the indices are numbered within a given
metavariable context rather than across an entire file, hence each
command gets its own numbering. This does not yet affect pretty printing
of universe level metavariables.
For debugging purposes, metavariables that are not defined now pretty
print as `?_mvar.123` rather than cause pretty printing to fail.
This PR modifies dot identifier notation so that `(.a : T)` resolves
`T.a` with respect to the root namespace, like for generalized field
notation. This lets the notation refer to private names, follow aliases,
and also use open namespaces. The LSP completions are improved to follow
how dot ident notation is resolved, but it doesn't yet take into account
aliases or open namespaces.
Closes#9629
This PR fixes a bug introduced in #7830 where if the cursor is at the
indicated position
```lean
example (as bs : List Nat) : (as.append bs).length = as.length + bs.length := by
induction as with
| nil => -- cursor
| cons b bs ih =>
```
then the Infoview would show "no goals" rather than the `nil` goal. The
PR also fixes a separate bug where placing the cursor on the next line
after the `induction`/`cases` tactics like in
```lean
induction as with
| nil => sorry
| cons b bs ih => sorry
I -- < cursor
```
would report the original goal in the goal list. Furthermore, there are
numerous improvements to error recovery (including `allGoals`-type logic
for pre-tactics) and the visible tactic states when there are errors.
Adds `Tactic.throwOrLogErrorAt`/`Tactic.throwOrLogError` for throwing or
logging errors depending on the recovery state.
This PR restores the feature where in `induction`/`cases` for `Nat`, the
`zero` and `succ` labels are hoverable. This was added in #1660, but
broken in #3629 and #3655 when custom eliminators were added. In
general, if a custom eliminator `T.elim` for an inductive type `T` has
an alternative `foo`, and `T.foo` is a constant, then the `foo` label
will have `T.foo` hover information.
This PR improves the 'Go to Definition' UX, specifically:
- Using 'Go to Definition' on a type class projection will now extract
the specific instances that were involved and provide them as locations
to jump to. For example, using 'Go to Definition' on the `toString` of
`toString 0` will yield results for `ToString.toString` and `ToString
Nat`.
- Using 'Go to Definition' on a macro that produces syntax with type
class projections will now also extract the specific instances that were
involved and provide them as locations to jump to. For example, using
'Go to Definition' on the `+` of `1 + 1` will yield results for
`HAdd.hAdd`, `HAdd α α α` and `Add Nat`.
- Using 'Go to Declaration' will now provide all the results of 'Go to
Definition' in addition to the elaborator and the parser that were
involved. For example, using 'Go to Declaration' on the `+` of `1 + 1`
will yield results for `HAdd.hAdd`, `HAdd α α α`, `Add Nat`,
``macro_rules | `($x + $y) => ...`` and `infixl:65 " + " => HAdd.hAdd`.
- Using 'Go to Type Definition' on a value with a type that contains
multiple constants will now provide 'Go to Definition' results for each
constant. For example, using 'Go to Type Definition' on `x` for `x :
Array Nat` will yield results for `Array` and `Nat`.
### Details
'Go to Definition' for type class projections was first implemented by
#1767, but there were still a couple of shortcomings with the
implementation. E.g. in order to jump to the instance in `toString 0`,
one had to add another space within the application and then use 'Go to
Definition' on that, or macros would block instances from being
displayed. Then, when the .ilean format was added, most 'Go to
Definition' requests were already handled using the .ileans in the
watchdog process, and so the file worker never received them to handle
them with the semantic information that it has available.
This PR resolves most of the issues with the previous implementation and
refactors the 'Go to Definition' control flow so that 'Go to Definition'
requests are always handled by the file worker, with the watchdog merely
using its .ilean position information to update the positions in the
response to a more up-to-date state. This is necessary because the file
worker obtains its position information from the .oleans, which need to
be rebuilt in order to be up-to-date, while the watchdog always receives
.ilean update notifications from each active file worker with the
current position information in the editor.
Finally, all of the 'Go to Definition' code is refactored to be easier
to maintain.
### Breaking changes
`InfoTree.hoverableInfoAt?` has been generalized to
`InfoTree.hoverableInfoAtM?` and now takes a general `filter` argument
instead of several boolean flags, as was the case before.
This PR improves the error messages produced by the `split` tactic,
including suggesting syntax fixes and related tactics with which it
might be confused.
Note that, to avoid clashing with the new error message styling
conventions used in these messages, this PR also updates the formatting
of the message produced by `throwTacticEx`.
Closes#6224
This PR updates the formatting of, and adds explanations for, "unknown
identifier" errors as well as "failed to infer type" errors for binders
and definitions.
It attempts to ameliorate some of the confusion encountered in #1592 by
modifying the wording of the "header is elaborated before body is
processed" note and adding further discussion and examples of this
behavior in the corresponding error explanation.
This PR adds explanations for a few errors concerning noncomputability,
redundant match alternatives, and invalid inductive declarations.
These adopt a lower-case error naming style, which is also applied to
existing error explanation tests.
This PR is a followup to #8914, fixing an oversight where
`letIdDeclBinders` is was not updated with the new format. This relies
on some bootstrapping code to stay in place, but we do bootstrap cleanup
that is currently possible.
This PR modifies `let` and `have` term syntaxes to be consistent with
each other. Adds configuration options; for example, `have` is
equivalent to `let +nondep`, for *nondependent* lets. Other options
include `+usedOnly` (for `let_tmp`), `+zeta` (for `letI`/`haveI`), and
`+postponeValue` (for `let_delayed)`. There is also `let (eq := h) x :=
v; b` for introducing `h : x = v` when elaborating `b`. The `eq` option
works for pattern matching as well, for example `let (eq := h) (x, y) :=
p; b`.
Future PRs will add these options to tactic syntax, once a stage0 update
has been done.
This PR adds support for throwing named errors with associated error
explanations. In particular, it adds elaborators for the syntax defined
in #8649, which use the error-explanation infrastructure added in #8651.
This includes completions, hovers, and jump-to-definition for error
names.
Note that another stage0 rebuild will be required to define explanations
using `register_error_explanation`.
---------
Co-authored-by: Joachim Breitner <mail@joachim-breitner.de>
Co-authored-by: Marc Huisinga <mhuisi@protonmail.com>
This PR changes the `show t` tactic to match its documentation.
Previously it was a synonym for `change t`, but now it finds the first
goal that unifies with the term `t` and moves it to the front of the
goal list.
This PR adds documentation to builtin attributes like `@[refl]` or
`@[implemented_by]`.
Closes#8432
---------
Co-authored-by: David Thrane Christiansen <david@davidchristiansen.dk>
Co-authored-by: David Thrane Christiansen <david@lean-fro.org>
This PR introduces an explicit `defeq` attribute to mark theorems that
can be used by `dsimp`. The benefit of an explicit attribute over the
prior logic of looking at the proof body is that we can reliably omit
theorem bodies across module boundaries. It also helps with intra-file
parallelism.
If a theorem is syntactically defined by `:= rfl`, then the attribute is
assumed and need not given explicitly. This is a purely syntactic check
and can be fooled, e.g. if in the current namespace, `rfl` is not
actually “the” `rfl` of `Eq`. In that case, some other syntax has be
used, such as `:= (rfl)`. This is also the way to go if a theorem can be
proved by `defeq`, but one does not actually want `dsimp` to use this
fact.
The `defeq` attribute will look at the *type* of the declaration, not
the body, to check if it really holds definitionally. Because of
different reduction settings, this can sometimes go wrong. Then one
should also write `:= (rfl)`, if one does not want this to be a defeq
theorem. (If one does then this is currently not possible, but it’s
probably a bad idea anyways).
The `set_option debug.tactic.simp.checkDefEqAttr true`, `dsimp` will
warn if could not apply a lemma due to a missing `defeq` attribute.
With `set_option backward.dsimp.useDefEqAttr.get false` one can revert
to the old behavior of inferring rfl-ness based on the theorem body.
Both options will go away eventually (too bad we can’t mark them as
deprecated right away, see #7969)
Meta programs that generate theorems (e.g. equational theorems) can use
`inferDefEqAttr` to set the attribute based on the theorem body of the
just created declaration.
This builds on #8501 to update Init to `@[expose]` a fair amount of
definitions that, if not exposed, would prevent some existing `:= rfl`
theorems from being `defeq` theorems. In the interest of starting
backwards compatible, I exposed these function. Hopefully many can be
un-exposed later again.
A mathlib adaption branch exists that includes both the meta programming
fixes and changes to the theorems (e.g. changing `:= by rfl` to `:=
rfl`).
With the module system there is now no special handling for `defeq`
theorem bodies, because we don’t look at the body anymore. The previous
hack is removed. The `defeq`-ness of the theorem needs to be checked in
the context of the theorem’s *type*; the error message contains a hint
if the defeq check fails because of the exported context.
