This is part 2 of 2 of #4801 (which closes#4654). That PR was split in
two to allow a stage0 update between declaring the `usize` functions and
using them where they are needed.
Add efficient `usize` functions for `Array`, `ByteArray`, `FloatArray`.
This is part 1 of 2 since there is a need to update stage0 between the
two parts. (See discussion below.)
Closes#4654
This PR neither adds nor removes material, but improves the organization
of `Init/Data/List/*`.
These files are essentially completely re-ordered, to ensure that
material is developed in a consistent order between `List.Basic`,
`List.Impl`, `List.BasicAux`, and `List.Lemmas`.
Everything is organised in subsections, and I've added some module docs.
We recently discovered inconsistencies in Mathlib and Std over the
ordering of the arguments for `==`.
The most common usage puts the "more variable" term on the LHS, and the
"more constant" term on the RHS, however there are plenty of exceptions,
and they cause unnecessary pain when switching (particularly, sometimes
requiring otherwise unneeded `LawfulBEq` hypotheses).
This convention is consistent with the (obvious) preference for `x == 0`
over `0 == x` when one term is a literal.
We recently updated Std to use this convention
https://github.com/leanprover/std4/pull/430
This PR changes the two major places in Lean that use the opposite
convention, and adds a suggestion to the docstring for `BEq` about the
preferred convention.
Remark: when splitting an `if-then-else` term, the subgoals now have
tags `isTrue` and `isFalse` instead of `inl` and `inr`.
closes#4313
---------
Co-authored-by: Mario Carneiro <di.gama@gmail.com>
Fixes#3270 by moving the deprecation check from
`Lean.Elab.Term.mkConsts` to `Lean.Elab.Term.mkConst`, so
`Lean.Elab.Term.mkBaseProjections`, `.elabAppLValsAux`, `.elabAppFn`,
and `.elabForIn` also hit the check. Not all of these really need to hit
the check, so I'll run `!bench` to see if it's a problem.
otherwise it remains in the equational theorem and may cause the
“unused have linter” to trigger. By moving the proof into
`decreasing_by`, the equational theorems are unencumbered by termination
arguments.
see also
https://github.com/leanprover/std4/pull/690#issuecomment-2095378609
This PR upstreams lemmas about List/Array operations already defined in
Lean from std/batteries.
Happy to take suggestions about increasing or decreasing scope.
---------
Co-authored-by: Mario Carneiro <di.gama@gmail.com>
Because of the last-added-tried-first rule for macros, all the special
purpose `decreasing_trivial` rules are tried for most recursive
definitions out there, and because they use `apply` and `assumption`
with default transparency may cause some definitoins to be unfolded over
and over again.
A quick test with one of the functions in the leansat project shows that
elaboration time goes down from 600ms to 375ms when using
```
decreasing_by all_goals decreasing_with with_reducible decreasing_trivial
```
instead of
```
decreasing_by all_goals decreasing_with decreasing_trivial
```
This change uses `with_reducible` in most of these macros.
This means that these tactics will no longer work when the
relations/definitions they look for is hidden behind a definition.
This affected in particular `Array.sizeOf_get`, which now has a
companion `sizeOf_getElem`.
In addition, there were three tactics using `apply` to apply Nat-related
lemmas
that we now expect `omega` to solve. We still need them when building
`Init` modules
that don’t have access to `omega`, but they now live in
`decreasing_trivial_pre_omega`,
meant to be only used internally.
Adds the ability to show a diff when `guard_msgs` fails, using the
histogram diff algorithm pioneered in jgit. This algorithm tends to
produce more user-friendly diffs, but it can be quadratic in the worst
case. Empirically, the quadratic case of this implementation doesn't
seem to be slow enough to matter for messages smaller than hundreds of
megabytes, but if it's ever a problem, we can mitigate it the same way
jgit does by falling back to Myers diff.
See lean/run/guard_msgs.lean in the tests directory for some examples of
its output.
This makes changes to the `GetElem` class so that it does not lead to
unnecessary overhead in container like `RBMap`.
The changes are to:
1. Make `getElem?` and `getElem!` part of the `GetElem` class so they
can be overridden in instances.
2. Introduce a `LawfulGetElem` class that contains correctness theorems
for `getElem?` and `getElem!` using the original definitions.
3. Reorganize definitions (e.g, by moving `GetElem` out of
`Init.Prelude`) so that the `GetElem` changes are feasible.
4. Provide `LawfulGetElem` instances to complement all existing
`GetElem` instances in Lean core.
To reduce the size of the PR, this doesn't do the work of providing new
`GetElem` instances for `RBMap`, `HashMap` etc. That will be done in a
separate PR (#3688) that depends on this.
---------
Co-authored-by: Mac Malone <tydeu@hatpress.net>
This shortens `Array.findIdx?` code, by using termination_by (and
well-founded recursion) instead of a structural recursion trick, with
the intent to make it more proof friendly.
One motivation is that it makes it easier to write a proof that
`Array.findIdx?` and `List.findIdx?` are equivalent. Furthermore, this
will be useful to prove that more complex functions are equivalent.
Closes#3646
- Removes the public definitions `Array.eraseIdxAux` and
`Array.eraseIdxSzAux` which were implementation details.
- Motivation: `Array.eraseIdxAux` and `Array.eraseIdxSzAux` were clearly
not intended to remain public, but simply making them private would make
it inconvenient to unfold them when writing proofs in Std.
- Adds documentation comments to the public `Array.eraseIdx`-related
definitions which remain.
- Removes `Array.eraseIdx'` which was just `Array.feraseIdx` wrapped in
a subtype and adds `Array.size_feraseIdx` to prove the subtype property
as a standalone theorem.
Co-Authored-By: Daniel Windham <daniel@atlascomputing.org>
Replaces `@[eliminator]` with two attributes `@[induction_eliminator]`
and `@[cases_eliminator]` for defining custom eliminators for the
`induction` and `cases` tactics, respectively.
Adds `Nat.recAux` and `Nat.casesAuxOn`, which are eliminators that are
defeq to `Nat.rec` and `Nat.casesOn`, but these use `0` and `n + 1`
rather than `Nat.zero` and `Nat.succ n`.
For example, using `induction` to prove that the factorial function is
positive now has the following goal states (thanks also to #3616 for the
goal state after unfolding).
```lean
example : 0 < fact x := by
induction x with
| zero => decide
| succ x ih =>
/-
x : Nat
ih : 0 < fact x
⊢ 0 < fact (x + 1)
-/
unfold fact
/-
...
⊢ 0 < (x + 1) * fact x
-/
simpa using ih
```
Thanks to @adamtopaz for initial work on splitting the `@[eliminator]`
attribute.
This is a quite substantial tactic.
It also includes the infamour `NatCast` typeclass (which I've equipped
with a module-doc). I wasn't at all sure where that should live, so it
is currently randomly in `Lean/Elan/Tactic/NatCast.lean`: presumably if
we're doing this it will go somewhere in `Init`.
---------
Co-authored-by: Leonardo de Moura <leomoura@amazon.com>
This will collect definitions from Std.Logic
---------
Co-authored-by: David Thrane Christiansen <david@davidchristiansen.dk>
Co-authored-by: Scott Morrison <scott.morrison@gmail.com>
`Array.set!` and `Array.swap!` are fairly similar operations, both
modify an array, both take an index that it out of bounds.
But they behave different; all of these return `true`
```
#eval #[1,2].set! 2 42 == #[1,2] -- with panic
#reduce #[1,2].set! 2 42 == #[1,2] -- no panic
#eval #[1,2].swap! 0 2 == #[1,2] -- with panic
#reduce #[1,2].swap! 0 2 == default -- no panic
```
The implementations are
```
@[extern "lean_array_set"]
def Array.set! (a : Array α) (i : @& Nat) (v : α) : Array α :=
Array.setD a i v
```
but
```
@[extern "lean_array_swap"]
def swap! (a : Array α) (i j : @& Nat) : Array α :=
if h₁ : i < a.size then
if h₂ : j < a.size then swap a ⟨i, h₁⟩ ⟨j, h₂⟩
else panic! "index out of bounds"
else panic! "index out of bounds"
```
It seems to be more consistent to unify the behaviors, and define
```
@[extern "lean_array_swap"]
def swap! (a : Array α) (i j : @& Nat) : Array α :=
if h₁ : i < a.size then
if h₂ : j < a.size then swap a ⟨i, h₁⟩ ⟨j, h₂⟩
else a
else a
```
Also adds docstrings.
Fixes#3196
The notation `a ∈ as` for Arrays was previously only defined with
`DecidableEq` on the elements, for (apparently) no good reason. This
drops this requirements (by using `a ∈ as.data`), and simplifies a bunch
of proofs by simply lifting the corresponding proof from lists.
Also, `sizeOf_lt_of_mem` was defined, but not set up to be picked up by
`decreasing_trivial` in the same way that the corresponding List lemma
was set up, so this adds the tactic setup.
The definition for `a ∈ as` is intentionally not defeq to `a ∈ as.data`
so that the termination tactics for Arrays don’t spuriously apply when
recursing through lists.
