Previously the formatter was using the builtin token table rather that
the one in the current environment. This could lead to round-tripping
failures for user-defined notations.
For an illustrative example, given the following notation
```lean
infixl:65 "+'" => Int.add
notation:65 a:65 "+'-" b:66 => Int.add a (id b)
```
then `5 +' -1` would parse as `Int.add 5 (-1)` and incorrectly pretty
print as `5+'-1`, which in turn would parse as `Int.add 5 (id 1)`. Now
it pretty prints as `5+' -1`.
Modifies how the declaration command elaborator reports when there are
unassigned metavariables. The visible effects are that (1) now errors
like "don't know how to synthesize implicit argument" and "failed to
infer 'let' declaration type" take precedence over universe level
issues, (2) universe level metavariables are reported as metavariables
(rather than as `u_1`, `u_2`, etc.), and (3) if the universe level
metavariables appear in `let` binding types or `fun` binder types, the
error is localized there.
Motivation: Reporting unsolved expression metavariables is more
important than universe level issues (typically universe issues are from
unsolved expression metavariables). Furthermore, `let` and `fun` binders
can't introduce universe polymorphism, so we can "blame" such bindings
for universe metavariables, if possible.
Example 1: Now the errors are on `x` and `none` (reporting expression
metavariables) rather than on `example` (which reported universe level
metavariables).
```lean
example : IO Unit := do
let x := none
pure ()
```
Example 2: Now there is a "failed to infer universe levels in 'let'
declaration type" error on `PUnit`.
```lean
def foo : IO Unit := do
let x : PUnit := PUnit.unit
pure ()
```
In more detail:
* `elabMutualDef` used to turn all level mvars into fresh level
parameters before doing an analysis for "hidden levels". This analysis
turns out to be exactly the same as instead creating fresh parameters
for level mvars in only pre-definitions' types and then looking for
level metavariables in their bodies. With this PR, error messages refer
to the same level metavariables in the Infoview, rather than obscure
generated `u_1`, `u_2`, ... level parameters.
* This PR made it possible to push the "hidden levels" check into
`addPreDefinitions`, after the checks for unassigned expression mvars.
It used to be that if the "hidden levels" check produced an "invalid
occurrence of universe level" error it would suppress errors for
unassigned expression mvars, and now it is the other way around.
* There is now a list of `LevelMVarErrorInfo` objects in the `TermElabM`
state. These record expressions that should receive a localized error if
they still contain level metavariables. Currently `let` expressions and
binder types in general register such info. Error messages make use of a
new `exposeLevelMVars` function that adds pretty printer annotations
that try to expose all universe level metavariables.
* When there are universe level metavariables, for error recovery the
definition is still added to the environment after assigning each
metavariable to level 0.
* There's a new `Lean.Util.CollectLevelMVars` module for collecting
level metavariables from expressions.
Closes#2058
These theorems are useful when one wants to simplify the goal state,
under knowledge that the bitvector operations don't overflow. This can
produce much smaller goal states that eventually allows `bv_omega` to
quickly close the goal.
Note that the LHS of the theorem is *not* in `simp` normal form, since
e.g. `(x + y).toNat` is normalized to `(x.toNat + y.toNat) % 2^w`. It's
not immediately clear to me what should be done about this.
Co-authored-by: Kim Morrison <scott.morrison@gmail.com>
Resolve cases when the `To/FromJSON` type classes are used with `Empty`,
e.g. in the following motivating example.
```
import Lean
structure Foo (α : Type) where
y : Option α
deriving Lean.ToJson
#eval Lean.toJson (⟨none⟩ : Foo Empty) -- fails
```
This is a follow-up to this PR
https://github.com/leanprover/lean4/pull/5415, as suggested by
@eric-wieser. It expands on the original suggestion by also handling
`FromJSON`.
---------
Co-authored-by: Kyle Miller <kmill31415@gmail.com>
---
Correct some stray spelling mistakes. I think the typo count is
asymptotically approaching zero.
Co-authored-by: euprunin <euprunin@users.noreply.github.com>
The problem here was that in Mathlib's `lean-pr-testing-NNNN` branches,
we were setting Batteries to a `nightly-testing-YYYY-MM-DD` branch. This
means that when we merge or rebase a new `nightly-with-mathlib` into a
Lean PR, the corresponding Mathlib testing branch would keep using an
old version of Batteries.
We also make sure to bump Batteries if Mathlib's `lean-pr-testing-NNNN`
branch already exists.
On a document edit, it may be the case that the first nontrivial
snapshot is e.g. for a macro-generated tactic call that does not have
range information. In that case, instead of just displaying nothing, we
should fall back to a previous range, in this case of the original
tactic macro.
Previously, it was not possible to use `decide` with most Array
functions (including `==`).
Later, we may replace some of these functions with defeqs that go via
the `List` operations, and use `csimp` lemmas for fast runtime
behaviour. In the meantime, this allows using `decide`.
Given the derived `Repr` instance for types with parameters, the absence
of `Repr Empty` can cause `Repr` instance synthesis to fail. For
example, given
```lean
inductive Prim (special : Type) where
| plus
| other : special → Prim special
deriving Repr
```
this works:
```lean
#eval (Prim.plus : Prim Int)
```
but this fails:
```lean
#eval (Prim.plus : Prim Empty)
```
---------
Co-authored-by: Kyle Miller <kmill31415@gmail.com>
Co-authored-by: Eric Wieser <wieser.eric@gmail.com>
This implements the first half of #3302: It improves the extensible
`apply_rfl` tactic (the one that looks at `refl` attributes, part of
the `rfl` macro) to
* Check itself and ahead of time that the lhs and rhs are defEq, and
give
a nice consistent error message when they don't (instead of just passing
on
the less helpful error message from `apply Foo.refl`), and using the
machinery that `apply` uses to elaborate expressions to highlight diffs
in implicit arguments.
* Also handle `Eq` and `HEq` (built in) and `Iff` (using the attribute)
Care is taken that, as before, the current transparency setting affects
comparing the lhs and rhs, but not the reduction of the relation
So before we had
```lean
opaque P : Nat → Nat → Prop
@[refl] axiom P.refl (n : Nat) : P n n
/--
error: tactic 'apply' failed, failed to unify
P ?n ?n
with
P 42 23
⊢ P 42 23
-/
#guard_msgs in
example : P 42 23 := by apply_rfl
opaque withImplicitNat {n : Nat} : Nat
/--
error: tactic 'apply' failed, failed to unify
P ?n ?n
with
P withImplicitNat withImplicitNat
⊢ P withImplicitNat withImplicitNat
-/
#guard_msgs in
example : P (@withImplicitNat 42) (@withImplicitNat 23) := by apply_rfl
```
and with this PR the messages we get are
```
error: tactic 'apply_rfl' failed, The lhs
42
is not definitionally equal to rhs
23
⊢ P 42 23
```
resp.
```
error: tactic 'apply_rfl' failed, The lhs
@withImplicitNat 42
is not definitionally equal to rhs
@withImplicitNat 23
⊢ P withImplicitNat withImplicitNat
```
A test file checks the various failure modes and error messages.
I believe this `apply_rfl` can serve as the only implementation of
`rfl`, which would then complete #3302, and actually expose these
improved
error messages to the user. But as that seems to require a
non-trivial bootstrapping dance, it’ll be separate.
Provide an instance `Inhabited (TacticM α)`, even when `α` is not known
to be inhabited.
The default value is just the default value of `TermElabM α`, which
already has a similar instance.
closes#5333
This PR tries to address issue #5333.
My conjecture is that the binder annotations for `C.toB` and
`Algebra.toSMul` are not ideal. `Algebra.toSMul` is one of declarations
where the new command `set_synth_order` was used. Both classes, `C` and
`Algebra`, are parametric over instances, and in both cases, the issue
arises due to projection instances: `C.toB` and `Algebra.toSMul`. Let's
focus on the binder annotations for `C.toB`. They are as follows:
```
C.toB [inst : A 20000] [self : @C inst] : @B ...
```
As a projection, it seems odd that `inst` is an instance-implicit
argument instead of an implicit one, given that its value is fixed by
`self`. We observe the same issue in `Algebra.toSMul`:
```
Algebra.toSMul {R : Type u} {A : Type v} [inst1 : CommSemiring R] [inst2 : Semiring A]
[self : @Algebra R A inst1 inst2] : SMul R A
```
The PR changes the binder annotations as follows:
```
C.toB {inst : A 20000} [self : @C inst] : @B ...
```
and
```
Algebra.toSMul {R : Type u} {A : Type v} {inst1 : CommSemiring R} {inst2 : Semiring A}
[self : @Algebra R A inst1 inst2] : SMul R A
```
In both cases, the `set_synth_order` is used to force `self` to be
processed first.
In the MWE, there is no instance for `C ...`, and `C.toB` is quickly
discarded. I suspect a similar issue occurs when trying to use
`Algebra.toSMul`, where there is no `@Algebra R A ... ...`, but Lean
spends unnecessary time trying to synthesize `CommSemiring R` and
`Semiring A` instances. I believe the new binder annotations make sense,
as if there is a way to synthesize `Algebra R A ... ...`, it will tell
us how to retrieve the instance-implicit arguments.
TODO:
- Impact on Mathlib.
- Document changes.
---------
Co-authored-by: Kim Morrison <scott.morrison@gmail.com>
Co-authored-by: Johan Commelin <johan@commelin.net>
We need to follow the fvar aliases registered by `match` in both
directions
Fixes#4714, fixes#2837
---------
Co-authored-by: Mario Carneiro <di.gama@gmail.com>
