This PR adds a stop position field to parser input contexts, allowing
the parser to be instructed to stop parsing prior to the end of a file.
This is step 1, prior to a stage0 update, to make run-time data
structures sufficiently compatible to avoid segfaults. After the update,
the actual code to stop parsing can be merged.
This PR moves arithmetic of `String.Pos` out of the prelude.
Other `String` declarations are part of the prelude because they are
generated by macros, but this does not seem to be the case for these.
This PR introduces a canonical way to endow a type with an order
structure. The basic operations (`LE`, `LT`, `Min`, `Max`, and in later
PRs `BEq`, `Ord`, ...) and any higher-level property (a preorder, a
partial order, a linear order etc.) are then put in relation to `LE` as
necessary. The PR provides `IsLinearOrder` instances for many core types
and updates the signatures of some lemmas.
**BREAKING CHANGES:**
* The requirements of the `lt_of_le_of_lt`/`le_trans` lemmas for
`Vector`, `List` and `Array` are simplified. They now require an
`IsLinearOrder` instance. The new requirements are logically equivalent
to the old ones, but the `IsLinearOrder` instance is not automatically
inferred from the smaller typeclasses.
* Hypotheses of type `Std.Total (¬ · < · : α → α → Prop)` are replaced
with the equivalent class `Std.Asymm (· < · : α → α → Prop)`. Breakage
should be limited because there is now an instance that derives the
latter from the former.
* In `Init.Data.List.MinMax`, multiple theorem signatures are modified,
replacing explicit parameters for antisymmetry, totality, `min_ex_or`
etc. with corresponding instance parameters.
This PR fixes the behavior of `String.prev`, aligning the runtime
implementation with the reference implementation. In particular, the
following statements hold now:
- `(s.prev p).byteIdx` is at least `p.byteIdx - 4` and at most
`p.byteIdx - 1`
- `s.prev 0 = 0`
- `s.prev` is monotone
Closes#9439
This PR adjusts the experimental module system to make `private` the
default visibility modifier in `module`s, introducing `public` as a new
modifier instead. `public section` can be used to revert the default for
an entire section, though this is more intended to ease gradual adoption
of the new semantics such as in `Init` (and soon `Std`) where they
should be replaced by a future decl-by-decl re-review of visibilities.
This PR changes the `show t` tactic to match its documentation.
Previously it was a synonym for `change t`, but now it finds the first
goal that unifies with the term `t` and moves it to the front of the
goal list.
This PR adds the `@[expose]` attribute to many functions (and changes
some theorems to be by `:= (rfl)`) in preparation for the `@[defeq]`
attribute change in #8419.
This PR adjusts the experimental module system to not export the bodies
of `def`s unless opted out by the new attribute `@[expose]` on the `def`
or on a surrounding `section`.
---------
Co-authored-by: Markus Himmel <markus@lean-fro.org>
This PR makes the style of all `List` docstrings that appear in the
language reference consistent.
Relies on #7240 for links and example formatting.
---------
Co-authored-by: Kim Morrison <kim@tqft.net>
This PR makes the docstrings in the `Char` namespace follow the
documentation conventions.
---------
Co-authored-by: Markus Himmel <markus@himmel-villmar.de>
This PR adds basic lemmas about lexicographic order on Array and Vector,
achieving parity with List.
Many lemmas are still missing for all three, particularly about how
order interacts with `++`.
This PR replaces `List.lt` with `List.Lex`, from Mathlib, and adds the
new `Bool` valued lexicographic comparatory function `List.lex`. This
subtly changes the definition of `<` on Lists in some situations.
`List.lt` was a weaker relation: in particular if `l₁ < l₂`, then
`a :: l₁ < b :: l₂` may hold according to `List.lt` even if `a` and `b`
are merely incomparable
(either neither `a < b` nor `b < a`), whereas according to `List.Lex`
this would require `a = b`.
When `<` is total, in the sense that `¬ · < ·` is antisymmetric, then
the two relations coincide.
Mathlib was already overriding the order instances for `List α`,
so this change should not be noticed by anyone already using Mathlib.
We simultaneously add the boolean valued `List.lex` function,
parameterised by a `BEq` typeclass
and an arbitrary `lt` function. This will support the flexibility
previously provided for `List.lt`,
via a `==` function which is weaker than strict equality.
This PR changes the signature of `Array.get` to take a Nat and a proof,
rather than a `Fin`, for consistency with the rest of the (planned)
Array API. Note that because of bootstrapping issues we can't provide
`get_elem_tactic` as an autoparameter for the proof. As users will
mostly use the `xs[i]` notation provided by `GetElem`, this hopefully
isn't a problem.
We may restore `Fin` based versions, either here or downstream, as
needed, but they won't be the "main" functions.
---------
Co-authored-by: David Thrane Christiansen <david@davidchristiansen.dk>
I made a few choices so far that can probably be discussed:
- got rid of `modn` on `UInt`, nobody seems to use it apart from the
definition of `shift` which can use normal `mod`
- removed the previous defeq optimized definition of `USize.size` in
favor for a normal one. The motivation was to allow `OfNat` to work
which doesn't seem to be necessary anymore afaict.
- Minimized uses of `.val`, should we maybe mark it deprecated?
- Mostly got rid of `.val` in basically all theorems as the proper next
level of API would now be `.toBitVec`. We could probably re-prove them
but it would be more annoying given the change of definition.
- Did not yet redefine `log2` in terms of `BitVec` as this would require
a `log2` in `BitVec` as well, do we want this?
- I added a couple of theorems around the relation of `<` on `UInt` and
`Nat`. These were previously not needed because defeq was used all over
the place to save us. I did not yet generalize these to all types as I
wasn't sure if they are the appropriate lemma that we want to have.
This PR roughly halves the time needed to load the .ilean files by
optimizing the JSON parser and the conversion from JSON to Lean data
structures.
The code is optimized roughly as follows:
- String operations are inlined more aggressively
- Parsers are changed to use new `String.Iterator` functions `curr'` and
`next'` that receive a proof and hence do not need to perform an
additional check
- The `RefIdent` of .ilean files now uses a `String` instead of a `Name`
to avoid the expensive parse step from `String` to `Name` (despite the
fact that we only very rarely actually need a `Name` in downstream code)
- Instead of `List`s and `Subarray`s, the JSON to Lean conversion now
directly passes around arrays and array indices to avoid redundant
boxing
- Parsec's `peek?` sometimes generates redundant `Option` wrappers
because the generation of basic blocks interferes with the ctor-match
optimization, so it is changed to use an `isEof` check where possible
- Early returns and inline-do-blocks cause the code generator to
generate new functions, which then interfere with optimizations, so they
are now avoided
- Mutual defs are used instead of unspecialized passing of higher-order
functions to generate faster code
- The object parser is made tail-recursive
This PR also fixes a stack overflow in `Lean.Json.compress` that would
occur with long lists and adds a benchmark for the .ilean roundtrip
(compressed pretty-printing -> parsing).
Continuation of #3958. To ensure that lean code is able to uphold the
invariant that `String`s are valid UTF-8 (which is assumed by the lean
model), we have to make sure that no lean objects are created with
invalid UTF-8. #3958 covers the case of lean code creating strings via
`fromUTF8Unchecked`, but there are still many cases where C++ code
constructs strings from a `const char *` or `std::string` with unclear
UTF-8 status.
To address this and minimize accidental missed validation, the
`(lean_)mk_string` function is modified to validate UTF-8. The original
function is renamed to `mk_string_unchecked`, with several other
variants depending on whether we know the string is UTF-8 or ASCII and
whether we have the length and/or utf8 char count on hand. I reviewed
every function which leads to `mk_string` or its variants in the C code,
and used the appropriate validation function, defaulting to `mk_string`
if the provenance is unclear.
This PR adds no new error handling paths, meaning that incorrect UTF-8
will still produce incorrect results in e.g. IO functions, they are just
not causing unsound behavior anymore. A subsequent PR will handle adding
better error reporting for bad UTF-8.
It seems:
* there was no actual need for the UInt32 valued version
* downstream we were getting duplicative lemmas about both
* so lets reduce the API surface area!
If anyone would prefer the remaining function is still called
`Char.utf8Size` I will happily change it. (`size` is hopefully still
unambiguous, and it's helpful to rename here so we can give a
deprecation warning that explains the type signature change.)
---------
Co-authored-by: Mac Malone <tydeu@hatpress.net>
Extends Lean's incremental reporting and reuse between commands into
various steps inside declarations:
* headers and bodies of each (mutual) definition/theorem
* `theorem ... := by` for each contained tactic step, including
recursively inside supported combinators currently consisting of
* `·` (cdot), `case`, `next`
* `induction`, `cases`
* macros such as `next` unfolding to the above
*Incremental reuse* means not recomputing any such steps if they are not
affected by a document change. *Incremental reporting* includes the
parts seen in the recording above: the progress bar and messages. Other
language server features such as hover etc. are *not yet* supported
incrementally, i.e. they are shown only when the declaration has been
fully processed as before.
---------
Co-authored-by: Scott Morrison <scott.morrison@gmail.com>
for SSFT24 summer school: https://github.com/david-christiansen/ssft24
---------
Co-authored-by: Kim Morrison <kim@tqft.net>
Co-authored-by: Kim Morrison <scott.morrison@gmail.com>
Co-authored-by: David Thrane Christiansen <david@davidchristiansen.dk>
Add docstrings, usage examples, and doc tests for `String.prev`,
`.front`, `.back`, `.atEnd`.
Improve docstring examples for `String.next` based on discussion
examples for `String.prev`.
---------
Co-authored-by: Kim Morrison <kim@tqft.net>
